Expertise · Guarantee · Quality
KN95 Protective Mask Foldable Particulate Respirator
KN95 Protective Mask Foldable Particulate Respirator
KN95 Protective Mask Foldable Particulate Respirator
Categories | Tarpaulin Accessories |
---|---|
Brand | TAIMEI Tarpaulin Shade Fabric Manufacturer |
Model | TM-BS9001 |
Executive Standard | EN 149:2001 + A1:2009 |
Particulate Filtration Efficiency | ≥95% |
Shelf Life | 3 Years |
Material | Melt Blown Fabric, Non-Woven Fabric |
Storage | -20℃——40℃ |
FOB port | Qingdao |
Terms of Payment | L/C, D/A, D/P, T/T |
Update Time | Mar 29,2024 |
-
Introduction
KN95 Respirator-Use by the General Public-GB2626-2006/2019 Standard
KN95 is an industry standard and means that the mask provides the intended effectiveness of filtering 95 percent of particles with a mass median diameter of 0.3 micrometers. Therefore, our mask can protect you well from PM10, PM2. 5, and even smaller particles. Our masks are FDA Approved & CE certified and tested.
Advantages:
2. Good comfortable.
3. N95 level protection.
4. Isolated droplets.
5. The mask is light and comfortable, you will forget to wear it within a few minutes
6. It has flexible upper side and ear hooks for easy placement
7. Filter out more than 95% of airborne particles and smoke
8. Static polypropylene non-woven fabric, keep healthy and safe when working or going out
9, ear-hook or strap-on, disposable, convenient, comfortable, portable
Cleaning & Storage
Cleaning is not applicable - disposable product. Product should be stored in clean, dry conditions within the temperature range: -20℃ to +40℃ with a maximum relative humidity of<80%. When storing or transporting this product, use original packaging provided. |
Testing & Certifications:
This PFE 95% filtration material has gone through rigorous testing and has passed all required certifications for use as the filter material in masks and respirators for blocking 95% of particles. It has passed the PFE (Particle Filtration Efficiency) Test. This test determines the material's filtration efficiency by passing aerosolized particles through the material at a constant flow rate and fixed air pressure. This test method complies with GB 2626-2006, EN149:2001+a1:2009.
|
Factory and Machine:
Colors Available:
-
White
Downloads:
- ASTM Level Guide> Download
- Melt-Blown Filter Test Report> Download
- Loading...
- *Name
- *Tel
- *Title
- *Content
- Office: No. 6, Cuiling Road, Qingdao, Shandong, China
- Factory: Qingdao · Weihai · Binzhou · Tai'an
- +86-532-88915029
- Send Email to us